How To Make A Trap

Instruction manual

1. Find two one and a half liter plastic bottles, fortunately, there is a lot of such garbage these days in nature . First cut off the top of one bottle, the one that goes into the cone. If you don’t have a knife at hand, you can use a sharp stone , a splinter of glass and other similar objects. Unscrew the cover from the cut cone. Then, in the same way, cut the bottom from another plastic bottle.

2. After the two parts of the structure are ready, put the part of the bottle that is smaller into the other part of the second bottle with the cap. In your hands is a future trap, consisting of two segments. Now they need to be fastened together . Along the outer edge of the parts of the bottles, worn one into the other, make an awl holes with a pitch of 2-3 cm. If there is no awl under the arm, a sharp stick or a heated nail that will melt the plastic will do.

3. Through the holes made in plastic bottles, pass the fishing line, fastening the two parts of the structure together. If there is no fishing line, you can take shoelaces, any rope, even natural fibers. Be sure to leave the long end of the fishing line or rope. Now, for this end, you should attach a trap for a bush or stone along the coast. It is best to set a trap in a bottleneck of the river, more fish go there. Such a device will come across a small fish - up to 8 cm in length. To get the prey, you need to unscrew the lid of the larger bottle. The fish will fall out.